|
Those little bugs looking at you when you drive, sometimes
need to be replaced. Some of mine got clogged up, and in the
process of trying to clean them out, or point them in a more
correct direction, I just jammed them up more. 
1. Unplug them from the washer fluid hoses.
2. Use a needle nosed vice grip or something to squeeze the
ends so you can just pull them out on the other side.
3. This might be a good time to wash and wax that tiny little
painted area that never gets any sunlight. Also you may want
to put a tiny bit of Chassis
Saver on the inside of your hood, this is a part that make
take in small parts of rust causing water.
3. Replace Washer Nozzles
4. Hook back up
5. Get a needle or tack or toothpick and use this to adjust
each of the 4 spray nozzles.
|
