|
Ah, to get rid of that plasticy shifter knob into something
super smooooth... mmmm...
Click to Enlarge
This is a very easy job, you will just need
some of your basic tools.
1. Take off that little plastic cover that's bordering your
shifter.
2. Take out your ash-tray
3. Behind your ashtray, you will see two screws. Take this
out too.
4. Now you can carefully lift up the entire wood section to
reveal the yummy goodness inside. Inside you will find a bolt
to remove the old shifter. While you're down here, remove any
pennies that have fallen into the hole.
5. Twist back on your new shifter, and adjust it so that it's
aligned with the car.
6. Screw it back on.
7. Install all the old stuff again.
|
